I wasn’t wrong about the winter like weather yesterday and last night – we woke up to a dusting of snow. And oh, does the creek look pretty!
The bow thruster tube is now in the boat and the glassing will probably begin today. I would find it pretty intimidating to cut a hole like this below the waterline but if you are a professional, you have faith in your skills.
Fits like a glove.
I’m not sure if you could see how thick this boat is by the sample I showed yesterday. This part tells the full story. If you count the layers can you tell how old the boat is – just like a tree?
On another job we are investigating a window leak and Pat was able to spot the problem – there is a large gap at the upper corner where the holes were mis-cut. We can’t, as professionals, just pack this full of silicone – it will never work for the long term. We are going to build the corner up and then reinstall. That should solve the problem.
Deal 111
Okay,
I promised so here is the first Deal 111. One deal, one day, one customer. The first to respond to the deal today gets it. This is a test so it may or may not continue according to responses. Only applies to storage customers without this on an existing work order.
Today’s Deal – Have your bilges cleaned and painted with no material cost – we pay for all cleaners, degreasers, paint, supplies, etc. Could easily save over $50. Heck, I’ll even do the labor at $55 per hour on this introductory one time deal. Remember, only the first response gets the deal.
The bow thruster tube is now in the boat and the glassing will probably begin today. I would find it pretty intimidating to cut a hole like this below the waterline but if you are a professional, you have faith in your skills.
Fits like a glove.
I’m not sure if you could see how thick this boat is by the sample I showed yesterday. This part tells the full story. If you count the layers can you tell how old the boat is – just like a tree?
On another job we are investigating a window leak and Pat was able to spot the problem – there is a large gap at the upper corner where the holes were mis-cut. We can’t, as professionals, just pack this full of silicone – it will never work for the long term. We are going to build the corner up and then reinstall. That should solve the problem.
Deal 111
Okay, I promised so here is the first Deal 111. One deal, one day, one customer. The first to respond to the deal today gets it. This is a test so it may or may not continue according to responses. Only applies to storage customers without this on an existing work order.
Today’s Deal – Have your bilges cleaned and painted with no material cost – we pay for all cleaners, degreasers, paint, supplies, etc. Could easily save over $50. Heck, I’ll even do the labor at $55 per hour on this introductory one time deal. Remember, only the first response gets the deal. 